加氢脱氮催化研究的新进展

化石燃料的加氢脱氮有利于改善油品质量及其稳定性，同时避免燃烧时NO_x的排放。本文介绍了不同化石燃料中有机氮化物的含量及类型，对不同加氢脱氮催化剂及其催化活性位的本质进行了探讨，同时论述了C—N键断裂机理及燃料中主要有机氮化物的HDN反应网络。着重概述了传统金属硫化物催化剂的改性方法，新型的金属碳化物、金属氮化物和金属磷化物催化剂的研究现状。     

Preparation and crystal structure of the La2Ni12P5 and isotypic ternary lanthanoid—Nickel phosphides

The new ternary phosphide La₂Ni₁₂P₅ has been prepared by direct arc melting of the components as pure metals and red phosphorus. The crystal structure has been determined using X-ray single crystal diffraction data. The compound exhibits a new type of crystal structure, P2₁/m with lattice parameters a = 10.911(3), b = 3.696(2), c = 13.174(4) Å, β = 108.02(2)°, V = 505,2(6) ų, Z = 2. Atomic parameters least squares refinement of 116 independent variables (anisotropic approximation for thermal vibrations) employed 1 284 independent I_o(hkl); R_F = 0.0278 and R_W = 0.0287. The crystal structure is characterized by trigonal prismatic arrangement of phosphorus atoms stacking variant of infinite (with phosphorus centered) columns built by metal trigonal prisms ‖ [010]. Two or three such columns are connected through common edges (lanthanum atoms). The compounds RE₂Ni₁₂P₅ (where RE = Ce, Pr, Nd and Eu) display the same with La₂Ni₁₂P₅ crystal structure. Lattice parameters of these compounds have been refined using powder diffraction data.     

Strukturen aus AIB2− und BaAl4−analogen Einheiten. I Die Verbindungen Sr4Pd5P5 und Sr2Pd3P3

Structures with AIB₂? and BaAl₄?type Units. I The Compounds Sr₄Pd₅P₅ and Sr₂Pd₃P₃ Sr₄Pd₅P₅ (Cmcm, a = 4.177(1) Å, b = 31.377(5) Å, c = 8.581(2) Å, Z = 4) und Sr₂ Pd₃P₃(Pmmm, a = 4.199(1) Å, b = 4.212(1) Å, c = 34.227(4) Å, Z = 4) have been prepared by heating the elements. Both structures contain exclusively units characteristic for the AIB_2? and BaAl₄?type. The ratio between isolated P-atoms and P₂?pairs is interpreted with an ionic splitting of the formulas.     

Hydrogen evolution reaction on Pt and Ru in alkali with volmer-step promotors and electronic structure modulators

Alkaline water electrolysis despite having a variety of choices for anodic oxygen evolution reaction (OER) catalysts out of non-precious metals suffers significantly due to the poor kinetics of cathodic hydrogen evolution reaction (HER) even with the state-of-the-art Pt and equally active Ru. The Volmer-step (water dissociation (WD) coupled proton adsorption) of alkaline HER is mostly the rate-determining step (RDS) and costs most of the work required. In this review, recent developments in improving the HER kinetics of Pt and Ru with Volmer-step promotors and electronic structure modulators have been comprehensively analyzed and critically presented with the challenges and prospects.     

优化金属磷化物电催化析氢性能的策略

日益严重的能源危机和环境污染问题使得探索清洁的可再生能源载体及减少对传统化石燃料的过度依赖成为人们面临的一项重要任务.因此,各种可持续能源如太阳能、风能、海洋能和生物质能等得到了广泛研究并取得了一定的进展.然而,这些能源因存在间歇性和不稳定性等缺点阻碍了其实际应用.近年,氢气作为一种能源载体,以其高能量密度和无碳排放的优点引起了人们的广泛关注,被认为是缓解日益严重的污染问题的最有前途的环保能源.对比目前采用的天然气热解和煤炭气化等传统制氢策略,电催化水裂解由于催化效率高,制氢纯度高和不产生温室气体,被认为是高效、环保、可持续的制氢策略.电催化水裂解由两个独立的半反应组成,分别是析氢反应和析氧反应.析氢反应作为水裂解的一个半反应,在降低制氢成本及提高产氢催化效率方面起着关键作用.然而,目前的核心问题之一是要开发高效的析氢电催化剂,以加快反应速度.目前,铂和铂基纳米材料被认为是高效的析氢电催化剂,但是其稀缺性和高成本阻碍了大规模实际应用.金属磷化物由于具有较高的本征活性并且在不同的电解质中都具有良好的电催化析氢性能,被证明是一种优良的析氢电催化剂.此外,与普通催化剂相比,金属磷化电催化剂还具有合成简便、效率高、成本低、省时等优点.本文详细介绍了近年人们在金属磷化物用于电催化析氢研究中取得的进展.首先,介绍了电催化析氢反应机理,金属磷化物的结构及作用,并对其优缺点进行了总结;随后,综述了金属磷化物的合成方法,包括后处理、原位生成和电沉积策略,并对不同方法进行了比较和讨论.此外,从元素掺杂、界面工程、空穴工程、修饰特定载体、构建特定纳米结构、设计双或多金属磷化物和其他发展的新方法等七个方面详细总结了促进金属磷化物电催化活性的多种策略,并进行了对比和讨论.最后,归纳了金属磷化物在电催化析氢应用中存在的问题和面临的挑战,并对未来的研究发展提出了展望.     

Topochemical Synthesis of Two‐Dimensional Transition‐Metal Phosphides Using Phosphorene Templates

Transition‐metal phosphides (TMPs) have emerged as a fascinating class of narrow‐gap semiconductors and electrocatalysts. However, they are intrinsic nonlayered materials that cannot be delaminated into two‐dimensional (2D) sheets. Here, we demonstrate a general bottom‐up topochemical strategy to synthesize a series of 2D TMPs (e.g. Co₂P, Ni₁₂P₅, and Co_xFe_2?xP) by using phosphorene sheets as the phosphorus precursors and 2D templates. Notably, 2D Co₂P is a p‐type semiconductor, with a hole mobility of 20.8 cm² V^?1 s^?1 at 300 K in field‐effect transistors. It also behaves as a promising electrocatalyst for the oxygen evolution reaction (OER), thanks to the charge‐transport modulation and improved surface exposure. In particular, iron‐doped Co₂P (i.e. Co_1.5Fe_0.5P) delivers a low overpotential of only 278 mV at a current density of 10 mA cm^?2 that outperforms the commercial Ir/C benchmark (304 mV).     

Insertion Reactions of Neutral Phosphidozirconocene Complexes as a Convenient Entry into Frustrated Lewis Pair Territory

Neutral phosphidozirconocene complexes [Cp₂Zr(PR₂)Me] (Cp=cyclopentadienyl; 1a : R=cyclohexyl (Cy); 1b : R=mesityl (Mes); 1c : R=tBu) undergo insertion into the Zr?P bond by non‐enolisable carbonyl building blocks (O=CR′R′′), such as benzophenone, aldehydes, paraformaldehyde or CO₂, to give [Cp₂Zr(OCR′R′′PR₂)Me] ( 3 – 7 ). Depending on the steric bulk around P, complexes 3 – 7 react with B(C₆F₅)₃ to give O‐bridged cationic zirconocene dimers that display typical frustrated Lewis pair (FLP)/ambiphilic ligand behaviour. Thus, the reaction of {[Cp₂Zr(μ‐OCHPhPCy₂)][MeB(C₆F₅)₃]}₂ ( 10a ) with chalcone results in 1,4 addition of the Zr⁺/P FLP, whereas the reaction of {[Cp₂Zr(μ‐OCHFcPCy₂)][MeB(C₆F₅)₃]}₂ ( 11a ; Fc=(C₅H₄)CpFe) with [Pd(η³‐C₃H₅)Cl]₂ yields the unique Zr?Fe?Pd trimetallic complex 13a , which has been characterised by XRD analysis.     

Phase‐Controlled Synthesis of Transition‐Metal Phosphide Nanowires by Ullmann‐Type Reactions

Transition‐metal phosphide nanowires were facilely synthesized by Ullmann‐type reactions between transition metals and triphenylphosphine in vacuum‐sealed tubes at 350–400 °C. The phase (stoichiometry) of the phosphide products is controllable by tuning the metal/PPh₃ molar ratio and concentration, reaction temperature and time, and heating rate. Six classes of iron, cobalt, and nickel phosphide (Fe₂P, FeP, Co₂P, CoP, Ni₂P, and NiP₂) nanostructures were prepared to demonstrate the general applicability of this new method. The resulting phosphide nanostructures exhibit interesting phase‐ and composition‐dependent magnetic properties, and magnetic measurements suggested that the Co₂P nanowires with anti‐PbCl₂ structure show a ferromagnetic–paramagnetic transition at 6 K, while the MnP‐structured CoP nanowires are paramagnetic with Curie–Weiss behavior. Moreover, GC‐MS analyses of organic byproducts of the reaction revealed that thermally generated phenyl radicals promoted the formation of transition‐metal phosphides under synthetic conditions. Our work offers a general method for preparing one‐dimensional nanoscale transition‐metal phosphides that are promising for magnetic and electronic applications.     

The new ternary pnictides Er12Ni30P21 and Er13Ni25As19: Crystal structures and magnetic properties

The new ternary pnictides Er₁₂Ni₃₀P₂₁ and Er₁₃Ni₂₅As₁₉ have been synthesized from the elements. They crystallize with hexagonal structures determined from single-crystal X-ray data for Er₁₂Ni₃₀P₂₁ (space group P6₃/m, a=1.63900(3) nm, c=0.37573(1) nm, Z=1, R_F=0.062 for 1574 F-values and 74 variable parameters), and for Er₁₃Ni₂₅As₁₉ (Tm₁₃Ni₂₅As₁₉-type structure, space group P6?, a=1.6208(1) nm, c=0.38847(2) nm, Z=1, R_F=0.026 for 1549 F-values and 116 variable parameters). These compounds belong to a large family of hexagonal structures with a metal-metalloid ratio of 2:1. HRTEM investigations were conducted to probe for local ordering of the disordered structure at the nanoscale. The magnetic properties of the phosphide Er₁₂Ni₃₀P₂₁ have been studied in the temperature of range 2<T<300 K and with applied fields up to 5 T. The magnetic susceptibility follows the Curie-Weiss law from 4 to 300 K. The measured value of μ_eff=9.59 μ_B corresponds to the theoretical value of Er³⁺.     

Thermal Oxidation Kinetics of Ni100–xPx Powders

The oxidation of Ni_100–xP_x(7.3 at%<x<25.0 at%) powders in air in the temperature range 350–450°C was determined by kinetics and X-ray diffraction. The isothermal kinetics was modeled using theGinstling–Brounstein equations. The oxidation process was found to be thermally activated with activation energy 127.8 kJ mol^–1 for x=7.3 at% to 157.7 kJ mol^–1 for x=25.0 at%. It was found that the rate constants for x=7.3 at% were approximately 100 times lower than those for x=25.0 at%. This revised version was published online in July 2006 with corrections to the Cover Date.